| EMG 35DC Active 4-String Bass Pickup |
| EMG-35DC |
|
 |
List Price: $139.99
Player Price: $95.00
Availability: On Order
Email Us or call TOLL FREE 866.751.3220 for more info, or order online!
The 35DC (Dual Coil) employs ceramic loaded, parallel placed coils to produce a deep low end, and yet maintain clarity. All of the DC Models are beefy, brilliant, and have more than enough output. The DC also uses the ultra low-noise preamp designed for the EMG- JV model. An 18 Volt supply is recommended for extended head room.
This pickup uses a 35 Extended housing that is 3.5 inches (89mm).
Features Include:- Logo Color: Silver
- Resonant Frequency (KHz): 4.3
- RMS Output Voltage: 1.4
- Peak Output Voltage: 2.0
- Output Noise (dBV): -115
- Output Impedance (Kohm): 2
- Current@ 9V (Microamps): 220
- Battery Life (Hours): 1,200
- Maximum Supply (Volts DC): 27
- Package Includes:
- EMG's exclusive Quik-Connect™ cable
- Prewired solid shaft volume/tone control set
- Output jack
- Battery clip set
- Adjustment screws
FREE GROUND SHIPPING IN THE U.S.!
Important Installation Notes:We always recommend taking your bass to a professional for pickup installation. While most EMG pickups are an exact direct-replacement, some routing of the pickup cavities may be required for proper installation depending on your application.Check your manufacturer's warranty before installing pickups. Installing aftermarket pickups may void your manufacturer's warranty. Only one battery is required for the pickups, and any active accessories such as the BTC, BTS, BQC, VMC, B30, and B64 equalizers. Two batteries wired in series for 18 volts is recommended for bass to increase headroom and enhance performance.Use an Alkaline or Lithium battery for longest life.The controls included with EMG Systems are 25K Ohm, Audio Taper. This value of control is required for the system to work correctly.When installing EMG Pickups, DO NOT reconnect the bridge ground wire. This wire is usually soldered to a volume or tone control casing and goes to the bridge. This wire grounds the strings and uses them and your body as a shield against hum and buzz. It also creates a shock hazard. EMG Pickups are shielded internally and DO NOT require string grounding. This greatly reduces the possibility of reverse polarity shock from microphones and other equipment.EMG Active Pickups have very little magnetism compared to passive pickups. We recommend you adjust the pickups as close to the strings as possible. Sustain and string movement will not be inhibited by close adjustment.If your installation is different from the diagrams in the included instructions or you need additional diagrams, visit EMG's website, www.emgpickups.com, for a complete listing of available diagrams. |
|
|
|
